SERIES MP-200

Blade Sized 17/8" (47.6mm) through 3¼" (82.5mm) for use with air, water or mud

The Type MP-200 bit was developed specifically for mineral exploration, coal test, foundation test and grout hole drilling. Also commonly used for drilling inside small diameter tubing in both the oil and water well industries.

The MP-200 Series bits are designed for use on lightweight drilling equipment. The Rock Cutter Blades perform best in soft formations. The carbide Insert Blades are designed for use in medium-hard formations that are stronger than those drilled by the Rock Cutter type.

These bits are available in the 3-blade Insert type or the 3-blade Rock Cutter type.  Stocks are regularly maintained in common sizes corresponding to diamond drill specifications, with the AX size ground to 
17/8" (47.6mm), BX to 211/32" (59.5mm), and the NX to 231/ 32" (75.4mm). These bits are used to drill inside standard diamond drill casing and should be ordered by the letter designation.

 


Part Number Part Name Approximate Wt.
Lbs. Kg.
H023 Bit Shank, 3-Blade .7 .32
H121 15/8" (41.3mm) OD Locking Bowl for use with 17/8" (47.6mm) and 2" (50.8mm) size bit blades .3 .14
H122 113/16" (46mm) OD Locking Bowl for use with 21/8" (54mm) and larger size bit blades .3 .14
H321 3-Blade Reaming Stabilizer (slip-on, friction-held, no threads). Reamers should conform to bit blade size.
17/8" thru 3" (47.6-76.2mm)
31/8" (79.4mm) & 3¼" (82.5mm)		 1.2
1.4		 .54
.63
H223-0032 United Geophysical Box Connector 1 .45
H223-0033 E-Rod Box Connector .8 .36
H223-0034 EW-Rod Box Connector .8 .36
H224-0053 1" (25.4mm) Line Pipe Male (Pin) Connector .8 .36
H223-0035 A-Rod Box Connector 1 .45
H223-0036 AW-Rod Box Connector 1 .45
H224-0054 1¼" (31.7mm) Line Pipe Male (Pin) Connector 1 .45
H223-0037 B-Rod Box Connector 1.2 .54
H223-0038 BW-Rod Box Connector 1.2 .54
 
3 Blade Rock Cutter Bit 3 Blade Insert Bit
 
When ordering blades, please specify:

1. Diameter of cutters required
2. Series (MP-200, DB-400, AC-600 or SH-800)
3. Premium Insert Blades (Carbide) or Rock Cutter (hardfacing only)

When ordering connectors, please specify:

1. Box or pin connector
 
Blade Size Approximate Wt. - Box of 12 Sets
Inches mm Rock Cutter 3-Blade Carbide Insert 3-Blade
Lbs. Kg. Lbs. Kg.
AX (17/8)* 47.6 8½ 3.9 8½ 3.9
BX (211/32)* 59.5 10 4.5 10 4.5
NX (231/32)* 75.4 11 5.0 11 5.0
2 50.8 8½ 4.0 8½ 4.0
21/8* 54.0 8½ 4.0 8½ 4.0
2¼* 57.1 8½ 4.0 8½ 4.0
23/8* 60.3 10 4.5 10 4.5
2½* 63.5 10 4.5 10 4.5
25/8 66.7 10 4.5 10 4.5
2¾* 69.9 10 4.5 10 4.5
27/8* 73.0 11 5.0 11 5.0
3* 76.2 11 5.0 11 5.0
31/8* 79.4 11¼ 5.1 11¼ 5.1
3¼* 82.5 11¼ 5.1 11¼ 5.1
Bit sizes available in 1/8 inch increments
*Popular sizes carried in stock.
Other sizes available on short notice.


Previous | Table of Contents | Next



PO Box 724
Lebanon, GA 30146

 TOLL FREE
1-800-282-6760
Tel: 770-591-2021
Fax: 770-591-6356

Designed and Hosted by
NetSpace Ads.com, Inc.
Copyright April 2000