Blue Demon BD-2 Carbide Bit

precision machined - extremely durable - easy to change


BD-2 Carbide Bit

BD-2 Bit is precision machined to closest possible tolerances for long, trouble-free service. Its oversized carbide cuts faster...never balls up...retains its original effectiveness far longer.

Tapered shank of the BD-2 drive fits into the drillhead without wedges or set screws. It can't wobble or work loose. And, unlike blade-type drill heads, BD-2 Bits are easily replaced with hammer punch (see below).


BD-2
BD-2 Bits can be replaced in seconds. Simply place punch in hole beneath bit and tap with hammer. Bit pops out. Then, insert new bit and tap lightly to seat.

 


Peaked carbide designed for tougher cutting conditions Specify BD-2LC
Order Blue Demon BD, BDA and BDC Drill Heads Today!
Model Hole Size; Ins.* No. of Bits per head
BD 4
BD 5
BD 6
BD 7
BD 9
BD 10
4
515/16
6
715/16
9
1015/16
5
8
7
10
11
17
Model Hole Size; Ins.* No. of Bits per head
BDA 4
BDA 5
BDA 6
BDA 7
BDA 9
BDA 10
4
515/16
6
715/16
9
1015/16
5
8
7
10
11
17
*These measurements may vary plus or minus 1/16" On BD auger-type heads, specify type of shank - 1" square, 2" square, 11/8" hex, 15/8" hex and spline. * BDC Drill Heads come in the same sizes as the BD and BDA Drill Heads *These measurements may vary plus or minus 1/16" BDA Drill Heads are offered with 23/8", 27/8", 3" and 4" API shanks. Other threaded shanks on request.

Bits for BD, BDA, and BDC Heads are sold separately. For BD and BDA heads specify BD-2 bit or BD-2LC bit. For the BDC Head specify the R-550CS.

Previous | Table of Contents | Next


738 Parkside Dr.
Woodstock, GA 30188

TOLL FREE
1-800-282-6760
Tel: 770-591-2021
Fax: 770-591-6356

Designed and Hosted by
NetSpace Ads
.com, Inc.
Copyright April 2000